Step-By-Step Guide to Properly Install Interlocking Concrete Blocks
In this advanced era, the construction industry has undergone important alterations over the past several years. Whether these changes come from building materials, evolving design & sustainability practices or shifts in project management approaches. But these exist. If talk about the interlocking concrete blocks, these are also creations of modern construction. These concrete blocks have gained huge popularity in no time. Rather than concrete floors, people prefer to install these blocks in the outer area of houses. If you also want to install Interlocking Concrete Blocks at your home, join hands with The Thames Concrete. They are known to offer top-quality construction materials.
This blog post will highlight the installation process of the Interlocking Concrete Blocks. So, stay it on.
Top-notch Tips: To Install the Interlocking Concrete Blocks
These days, Interlocking concrete blocks have become more trendy due to their low installation expense and long-lasting durability. You can add an aesthetic look to your living space by installing these concrete blocks. So, let’s explore how you can commence the process of interlocking cement blocks:
Plan and Preparation (choose the right size concrete bricks)
Interlocking Concrete blocks come in numerous sizes and shapes. So, it’s up to you which type and size of concrete blocks you want to install on your floor. To achieve this, you must measure the area where you will be laying the interlocking Concrete blocks. After getting an idea, look for the preferred size which suits your floor and budget. Additionally, clear the area of any debris, vegetation, or rocks and ensure the ground is level. If your project involves a retaining wall, consider checking local building codes and obtaining any necessary permits.
Excavation and Base Preparation
When the area (where you want to install concrete bricks) is marked and cleared, start the excavation process. Dig a trench according to the layout you have marked, and ensure it is deep enough to accommodate the first course of blocks and an ideal base material. The depth of the trench will depend on the height of your project and the manufacturer’s recommendations. Moving further, build a stable base for the blocks by adding a layer of compacted gravel or crushed stone. This base provides drainage and aids in preventing settling over time. Use a compactor to ensure the base is firm and level, taking extra care at corners and curves.
Laying of Sand to ready the Surface
After completing the digging process, the rock is spread on the cleared floor to be levelled and smoothened to make it ready for establishing the new base. Along with this make sure that you are using an equal amount of cement to maintain both grout surfaces to ensure an even finish. At this point, you must, be careful because a strong reinforcing mesh base is needed to make the blocks stay fixed at their respective place.
Installation of Edge Restraint
At this step, you must create edges or outer boundaries to maintain the proper installation of the interlocking concrete blocks to avoid any type of movement that could arise because of the sand bed and concrete blocks. These boundaries can be made in numerous ways such as rigid edge restraints, concrete restraints, moulded restraints, and so on, which could be picked up according to the customer’s choice.
Time to Fixing Interlock Blocks
After doing all the preparations, you can start installing interlocking bricks in your preferred patterns. To obtain the perfect block alignment, you can install concrete blocks carefully and with the help of the required tools. During this process, make sure you properly lock each brick with another brick to avoid any loose and messy installation.
Removal of Edges
After completing the installation of the Interlocking Concrete Blocks in the required pattern, you can cut the extra edges to attain the aesthetics of your project. This will not only aggrandize the looks but will also make the blocks appear clean, seamless, and dapper.
Finishing Touches
After completing all the above-mentioned steps, there is a need for the last finishing, without which your installation is incomplete. It is the scattering of sand on your concrete block floor. After rolling out a sand layer on top of the pavers, you can utilize a vibrating plate over the surface to turn the interlocks between the blocks strong. The deep holes between the concrete blocks can be filled with excessive sand. Finally, backfill any gaps behind the wall with soil or gravel to improve drainage and prevent erosion. Now, you have successfully installed interlocking concrete blocks for a durable and visually appealing outcome.
The Bottom Line
The rapid invention of interlocking concrete bricks made it the first choice of individuals. Earlier, people used to lay flooring here, nowadays they use concrete bricks. This is how advancement changes the way of construction. Additionally, if you follow all the above-provided steps during the installation of interlocking concrete blocks at your place, you can create a sturdy and aesthetically pleasing structure that enhances your outdoor space. These are not just limited to your backyard or outer floor, you can install these pieces of concrete bricks in your garden or park borders and pathways etcetera. If you need any further information about the installation of the interlocking concrete bricks, shake hands with experts at “The Thames Concrete”. They will guide you in the right direction by sharing the required knowledge.
